Blog

Are Slab Leaks Covered by Insurance?

slab leak

How Much Does a Slab Leak Repair Cost?

Typically, a slab leak costs around two thousand dollars. Of course, this number can raise depending on how inaccessible the slab leak is. Tunneling through concrete and the surrounding architectural features is not only expensive, but it is also very difficult. It takes finesse and expertise. That’s why it’s important to consider two thousand dollars as a good standard, but one that can fluctuate depending on how hard the problem is to solve.

Is a Slab Leak Dangerous?

While slab leaks are not necessarily dangerous, when they are not treated in a quick and efficient action, they can cause a dangerous amount of damage to your home. What may first begin as a small crack, will inevitably deepen and grow bigger. There are two fronts that need to be addressed: the plumbing itself, and the foundation of the home. The pipes may need to be rerouted, which is a serious undertaking. They will need to be fixed regardless. After the plumbing has been addressed, the foundation of the home will need to be surveyed and repaired.

Are Slab Leaks Covered by Insurance?

According to the standard terminology of homeowner’s insurance, insurance providers will usually cover the cost of tearing out and replacing the slab, but they will not extend that coverage to the plumbing itself. In order to acquaint yourself with the particulars of your homeowner’s insurance, please be sure to read all the appropriate terms and conditions. 

What Do You Do If You Suspect a Slab Leak?

The first thing that you should do if you suspect a slab leak in your home is to call a professional plumbing company. The plumbers that you select should be insured and licensed, with appropriate credentials. They should also come with good recommendations. Please be sure to secure an appointment as soon as possible in order to mediate the encroaching water damage.

What are the Signs of a Slab Leak?

Do you have a slab leak? Please take a look at the following signs of a slab leak to further educate yourself pertaining to whether or not you have such a leak in your home. 

  • Hot spots on the floor. If there is a consistently hot area on the floor, it’s important for you to start investigating whether it is due to a pipe leak.
  • A sudden and unexplained spike in your monthly water bills.
  • Damp carpet or warped flooring.
  • The growth of mildew or mold.
  • Your hot water heater is consistently running.
  • Water pressure decrease.
  • Water pooling in unexpected areas of the home.

How Bad is a Slab Leak?

Slab leaks are very bad for the foundation of your home. They can also be quite costly. Please be sure to secure slab leak insurance coverage if at all possible. Slab leaks cause a lot of damage to the home’s foundation. Leaks of the slab variety will also weaken the structural integrity of the home. This includes the concrete and steel supports for the home. Over time, water pressure and water leakage will cause the foundation of the home to shift, move and eventually crack or collapse.

How to Dry Slab Leak

If you want to dry a slab leak, then the first step is to absorb all the lingering water that is on the floor. You can do this with towels or rags. Once all of the water is absorbed, the next thing that you should do is set up a dehumidifier at a high setting. This will help pull out any moisture that is in the air. If the water is just located in one area, isolate that area by closing the door and enclosing the area. You can also block off the area with a plastic tarp.

Can Slab Leak Create Mold Problem

Serious plumbing leaks that go unrecognized and unrepaired for any serious amount of time will create mildew and mold. Mildew and mold damage surrounding architectural elements in addition to manifesting harmful spores. These spores circulate through air vents in the home and sicken the inhabitants. Please be sure to have a mold remediation specialist on hand to address any serious mold development in your home.

Can You Hear a Slab Leak

Apparently, one of the unique ways that a slab leak can be detected is through listening. If you believe that a certain area of your home is the location of a slab leak, try putting your ear to the floor. You may be able to hear the sound of running water underneath the floor. In order to finalize your conclusion, select a qualified plumber for slab leak detection. Slab leak detection is a separate, though related, service to slab leak repair. There are generally separate costs involved with each plumbing service.

Do you have plumbing repairs on your agenda? Our friendly staff at Slab Leak Solutions are ready to take your phone call at 817-281-5325. Receive quality repair for your slab leak in Fort Worth, TX!

Can thermal imaging find water leaks?

Thermal imaging of walls during an inspection

Finding a leak without harming your home

A cement foundation for your home makes it secure and stable, and the plumbing is placed and ran before they pour the foundation during construction. What you may not expect when your home is built, the possibility of a slab leak from the plumbing. Then when it happens, the destruction and expense of finding and repairing the leak become a homeowner’s nightmare. Until recently when a thermal inspection has become available.

There are many things that are a nightmare for homeowners, and such as roof repairs, HVAC system going out, water heater leaking, and leaking underground water pipes, aka, slab leaks. A water leak undetected in the slab can create a lot of other issues than just a leaking pipe. There is possible damage to the walls, which will work its way up to the ceiling if not found and repaired. Fortunately, new technology in plumbing has made that nightmare a little easier though with thermal inspection home.

How can you tell if a wall has water damage?

For any home or property owner, unfortunately, thermal inspection isn’t possible. This I usually available through a plumber that has a thermal inspection camera. This makes it more important for you to recognize the indications of possible water damage. Water leaks can damage the floors, walls, and left undetected, and toxic mold will grow. Water leaks will cause permanent damage to the structure.

Water damage from floods, leaking appliances, ice dams, and overflowing bathtubs are easily determined, but the water damage from leaking water pipes isn’t always noticed. Unfortunately, leaking water pipes are often difficult to detect.  The high-risk areas that you should check for water damage are: 

  • The Walls: The easiest and usually most obvious water damage signs are water stains. It is usually dark circles on the ceilings, walls and around the door and window frames. Another sign would be cracked drywall, soft and swollen areas in the wall.
  • The Floors: If there is water damage to the floor, left unrepaired, it will seep into the subflooring, causing more damage. Buckling or warped floors are indications of water damage, particularly in the basement. Dark or white stains on wood floors or damp carpeting show water damage and a damp, moldy odor in a house.
  • The Pipes: Check the basement bathroom, laundry room, and kitchen water pipe connections for corrosion, leaks, or water stains. Inspect the faucet connections for loose or missing caulking and missing grout. These are indications of water leaks. Check for wet spots on the floor around the water heater and the tank for rust. 
  • The Basement: Houses with a basement will frequently have damage baseboards, flooring, furniture, and walls. The first indicator there is or has been a water leak is a musty odor of mildew and mold. If you notice this odor, check for cracks, dampness, mildew, mold, rust, and stains.
  • The Attic: Check the attic for mildew, mold, and water stains, especially the areas where the roof planes meet and create a valley. Check around the chimney and plumbing vents. If the insulation is missing, sagging, torn or has wet spots/stains, these are indications of a water leak, usually from the roof.
  • The Exterior: Check around the exterior at the roof for cracked, curled shingles, flashing that is damaged or missing.  Another sign of water leak is standing water around the foundation. This could also be caused by damaged, missing, or lack of gutters and drain spouts or poor drainage.

How can you tell where a water leak is coming from?

The water you bathe and drink is under pressure, making it easier to notice a leak. Wastewater, however, moves by gravity rather than under pressure, making it difficult to detect and even hard to find the leak. Just like a roof leak, where you see the water coming from may not be where the leak begins, because water runs downhill. We reviewed the outward visual signs of water damage earlier, and now we will discuss how to detect underground water leaks without the aid of thermal inspection.   

  • Look for areas that are constantly wet on your property. 
  • Observe if there is water flow from the curb, driveway, and street. It may be a steady stream or a puddle that never dries, or a dark spot on the concrete. 
  • Check the water meter, making a note of the meter reading. Keep all water turned off inside the house for 2 or 3 hours, then re-read your meter. If it has moved, then you have a water leak underground, possibly under the house. Call a plumber and they can check for unseen leaks in the foundation or underground with a thermal inspection camera that will pinpoint exactly where the leak is and give you an estimate on repairing the leak. 

What is a thermal leak detector?

The thermal leak detector uses infrared sensors for a thermal inspection that measures the surface temperatures around your home or other structure. They make it possible to determine where your home is lacking energy efficiency with escaping cold and warm air.

What are infrared thermometers used for?

They use infrared thermometers for a thermal inspection that checks the surface temperature or checking the temperature of something from a distance. Infrared thermometers are quick, such as those used in a pediatrician office now for checking an infant’s temperature. They give an accurate temperature without ever touching the object, even a moving one. An infrared thermometer used correctly for a thermal inspection can help a homeowner find leaks around their house or determine areas of the house that are poorly insulated. 

Leak in copper plumbing pipe

How do you know if mold is behind drywall?

Follow your nose!  You can smell mildew and mold, it is a dirty, musty, almost earthy smell, like rotting leaves. If there is water standing or recurring in an area, such a water leak, it is providing the food that mold needs to grow.

If you suspect you have a foundation or underground water leak, an experienced plumber can provide a thermal inspection with the technology of thermography inspection frequency. This advanced and non-invasive technology enables a plumber or inspector to find things that are not visible but important to the home. Call 817-281-5325 today for your thermal leak inspection in Fort Worth, TX.

Can water come up through slab?

slab foundation service

So, what causes a leak in the slab?

With winter arriving fast and hard, with the rain, many homeowners are finding home maintenance and repairs that are needed. Like where slab leak and mold are and creating a slab leak from rain. Rain isn’t the only cause of a slab leak, causes can from other things like a busted pipe in the foundation or believe it or not, a roof leak.

When the pipes are inside the home or under the home’s foundation leak, it will begin leaking at the foundation too. Usually, these leaks are insignificant and small to start, but the damage they can cause get to be expensive and inconvenient.

When a slab leak isn’t addressed, the water will saturate the ground under your home. Your floors will become uneven and your home will slowly sink. It is important to address a slab leak as soon as you notice it, find where it is coming from and have the repair by a professional. 

Poor Constructed, Low-Quality Pipes

Homes that were not constructed correctly, or cheap piping was used are the most common slab leak causes. Either of those can lead to water pipes getting bent, dented, or kinked during construction and installation.

Exterior Pressure

High water pressure from the main water source can cause a slab leak. Another type of exterior pressure is when the ground shifts, causing the house to move will put the pipes under pressure. Ground shifting is normal within a certain amount, and other things that can cause the ground to shift are:

Earthquakes, Eroding Soil, or Underground stream

A slab leak from an exterior pressure is usually a large-scale incident with the potential of causing a lot of damage. That damage will lead to the pipes flooding the house and the immediate area around it.

Poor Water Quality

The pH level in your water can be too high or too low in acidic, making it hard water or soft water. Either way, this can cause pipes to corrode and create a slab leak. Any sign of a slab leak should be addressed immediately to avoid expensive or irreversible water damage.

Abrasion

A slab leak can be caused by abrasion. This happens when the water pipes are rubbing against a surface when the water is on. It could be a concrete foundation, the gravel used when the piping was installed, or rubbing against other pipes. The rubbing creates constant friction that will gradually wear the pipe down and ultimately create a slab leak. The pipes for hot water pipes are more apt to have this happen than the cold-water pipes because they contract and expand with the hot water.

Aging and Time

The biggest offender to create a slab leak is age and time. A slab leak is more common among older homes where copper pipes or galvanized steel pipes were used. These types of pipes are more likely to corrode over time and the extended period of pressure and stress on these pipes will lead to a slab leak. Regular inspection and performing necessary maintenance can help catch these things before they become a problem slab leak.

 Are slab leaks common?

Is a slab leak expensive? Thankfully, a slab leak isn’t a common problem, but they aren’t that uncommon either, and they are a stressful headache and they can be expensive. Sometimes a slab leak can be a simple fix, and sometimes, a slab leak is intense because it can require tearing up the house’s concrete foundation to find the leak. That part is messy and time-consuming. There are indicators that you can watch to catch a slab leak before it gets too bad.

Ground shifting: The ground shifts naturally, moving with the earth’s cooling and heating, slowly shifting water pipes and eventually causing a leak.  Or like earthquakes and sinkholes are dramatic shifts that can cause a slab leak.

Corrosion: Copper and galvanized steel water pipes interact with the minerals in the soil. After a time buried in the ground, the minerals in the soil and in the water eat away at the pipes, causing corrosion, thus, a slab leak occurs.

Faulty, inadequate wrapping: When water pipes can rub against a concrete foundation, or each other as they contract and expand with the temperature. This friction will wear holes and a slab leak occurs. By wrapping them properly, it provides protection from breakage and holes, thus preventing a slab leak.

Can water seep up through concrete slab?

The immediate, simple answer to this question is yes. Concrete is a porous material after it has dried, becoming sponge-like.  It won’t soak up water as a soft sponge will, but it will soak that sponge as it slowly seeps from a slab leak.

cracks foundation slab

What are the signs of a slab leak?

There are seven signs you may have a slab leak:

  • A sudden spike in the water bill.
  • Water pooling around the yard where there shouldn’t be.
  • Carpet feels damp, hardwood floors are warping.
  • The appearance or smell of mildew or mold.
  • Water pressure is weak.
  • The water heater runs constantly.
  • Hot spots in the floor.

How do I find a water leak under my slab?

The last century has seen many advances in plumbing, still, as a homeowner, you shouldn’t be surprised to experience a slab leak at some time. Unfortunately, those water supply lines can be where there are leaks, sometimes beneath the flooring, and not discovered for weeks, even months.

  • To minimize this happening, a regular crawl under your house can be helpful.  Start by turning off the plumbing fixtures through the house. This will enable you to determine any source of water leaks if you find water pooling under the flooring in the crawl space.
  • Next, look at the water meter and if the dials are moving, this indicates the water supply line is leaking. Even the dial isn’t moving, keep the fixtures off and recheck the dials in an hour. If there is a change in the dial, you have a slow leak.
  • Locate where plumbing fixtures and water supply line valves connect. You’ll find the connections for the shower and tub in an access panel. Check the water lines to the water heater too.
  • Look under bathroom and kitchen cabinets where the P-traps are located. These are common areas for water leaks and can usually be fixed simply by tightening the fittings.
  • Next, turn the water on in one of the sinks, then with a flashlight go to the crawlspace. If you see damp spots or water dripping, you’ve found your leak.

If none of the checks listed above find a slab leak, it is time to call a professional. Finding and repairing a slab leak is just as important as finding and repairing a roof leak. Both are important to maintaining a healthy, stable home. Call 817-281-5325 today for your slab leak repair in Fort Worth, TX from Slab Leak Solutions.

When Should You Repipe a House?

copper pipes

Is It Time To Repipe?

There are times when a home has a lot of plumbing issues to the point where repiping plumbing is the only way to fix them. Those reasons could be the existing pipes have become corroded which is affecting the water pressure, the water is rusty when it comes out, or there are multiple leaks. When somebody buys an older home, they will often repipe the entire house before finishing out the walls and painting.

The process of repiping plumbing is done by installing the whole-house repiping, often with copper pipes, PEX, or a combination of both.  The process is typically started by removing all the old accessible piping first, then determine what is needed to install the home repiping with PEX or repipe plumbing copper for the new plumbing system.

The decision what type of material to use for repiping plumbing in a house is determined by different factors such as budget and climate. The climate is a major concern in areas where the pipes may be buried where the ground is frozen for a good part of the winter months. There are several more questions when it comes to repipe and plumbing a structure, which we are going to address and answer here.

Does Repiping a house add value?

The piping in your home provides water much like the various lines to the HVAC system provide you heating and cooling. For any home with questionable water pipes, whatever home repiping costs maybe are worth it. A few of the benefits you can expect to have when you repipe your home:

  • Water Supply Will Be Rust-Free: One way to know if the pipes in a home are older and beginning to fail will have rust running through the pipes and out the faucets. Rusty water isn’t something anyone wants to drink or bathe in. By repiping plumbing the entire house, you will eliminate that rusty water and make the water taste better.
  • Water Pressure Improves: As a plumbing system ages, the water pressure begins to weaken because the pipes have become corroded. A total house water pipe replacement with new copper lines or PEX piping will improve the water pressure because it will have a better flow, making bathing and washing dishes easier and pleasant.
  • Plumbing System is Safer: With PEX piping, they are better for your health because they do not corrode, or rust and they fight the growth of bacteria.
  • Plumbing Leaks Stopped: Old pipes are prone to leak which can cause water damage with mold growth to follow. By repiping your entire house, you will be getting rid of any possible leaks, possible water damage, and mold growth as well as minimize the chance of freezing water pipes in the winter.
  • Home Value Increases: With total house repipe plumbing, the value will increase immediately and make the property more appealing.

Whats better PEX or copper?

PEX piping won’t degrade as copper does and it is more resistant to freezing and bursting than copper because it is flexible. PEX Tubing is less expensive and easier to install. The following are the pros and cons of PEX over copper pipe to repipe plumbing in your home:  

The Pros:

  • PEX is less likely to have leaks because it won’t corrode like copper, it resists freezing longer and it has a higher PSI to withstand bursting.
  • PEX Tubing is becoming standard for the plumbing industry.
  • City water supplies often have high levels of acid and other corrosive matters that eat copper tubing walls. PEX plumbing is resistant to those corrosive matters.
  • PEX is less expensive and it is easier to install, making labor charges less.
  • PEX tubing is flexible and an extruded manufactured product that is stored and shipped on spools, where it can be easily cut to practical lengths. The cost to ship and handle this product is much less than copper because it is lighter and easier to store.
  • PEX repipe plumbing does not require as many fittings as rigid copper piping and can be to flexed to make 90-degree corners without the usual elbow fittings. Because PEX tubing is unrolled from a spool, long runs can be made without coupling fittings.
  • No soldering is needed to attach PEX tubing to fittings, eliminating any possible health hazards from acid flux or lead-based solder.
  • PEX does not require a torch for making connections, thus making it safer for repipe plumbing installations.
  • With PEX, the water will flow quieter, almost eliminating the “water hammer” noise that is characteristic of copper piping.
  • With complete repipe plumbing using PEX, by installing from the water source, a manifold is used for each faucet, reducing water pressure loss at any of the faucets when the water is turned on elsewhere.
  • PEX piping uses push type fittings that do not require special installation tools. These fittings are more expensive than traditional plumbing fittings, but water leaks can be repaired without cutting the water off.

The Cons:

  • PEX is susceptible to damage by rodent and UV rays. It is recommended not to use PEX Tubing where it isn’t exposed to constant sun when repiping plumbing for your home, and to make your home rodent resistant.
  • Because PEX piping is flexible, if it rubs each time the water is turned off and on, it can begin leaking. This can be minimized by using bend protectors for any 90 degrees turn and to protect any hold the PEX runs through.

How long does it take to Repipe a whole-house?

Repiping plumbing for a whole home typically takes anywhere from two days to a full week, all depending on home’s size and what kind of piping system is in place. The process begins by preparations for repiping, and most plumbers are now using PEX pipe. This makes for a minimally invasive process, thus lowering the construction site in and around your home.

  • There will still be the need for drilling/sawing of holes, pipes and equipment, ladders, and tools will be used. It is recommended to remove any belongs and furniture of value before a job of repiping plumbing begins and request the plumber to use drop cloths to cover the flooring and what can’t be easily moved such as heavy furniture.
  • Next a pressurized potable water system is installed to create a safe working space without disconnecting the current piping. This enables you to live in the house while the repiping is being done.
  • The changeover is the next step is the longest step of this repiping plumbing process. The old plumbing system is turned off and all tie-ins are unplugged from the water service with the new piping tied in.
  • Finally, the clean-up is done!
many pipes in a wall

Is Repiping covered by insurance?

Typically, repiping is not covered because complete repiping plumbing is considered by most insurance companies as a preventative measure, not a replacement measure. However, if there is any corroded pipes or failing pipes that have caused damage, they will pay for that damage to be repaired.

Each homeowner’s insurance policy is different, so you should review yours before scheduling a job for repiping plumbing so that you know how to budget the job. Some policies may pay for professional plumber services to fix an issue while some policies will only pay for water damage.

If the plumbing problems stem for homeowner’s lack of maintenance or neglect, most homeowner’s insurance claims will be denied.  Many homeowner insurance companies pay for any damage caused by a water leak twice, after that, they may consider the house to be a high risk and cancel the policy.

While copper piping is still in existence and will be for the unforeseeable future as it is still used in some cases, PEX piping is the preferred choice by contractors today. As such, it is almost exclusively used in new construction and for repiping plumbing in existing homes. The benefits of PEX far outweigh that of copper piping and should be considered when repiping a home. Want to get started on repiping your house in Fort Worth, TX? Call Slab Leak Solutions at 817-281-5325 today!

What Are the Signs of a Slab Leak?

A Picture of a Parque Floor Lifting Due to Damage.

What Do You Do If You Suspect a Slab Leak?

One of the most stressful things that you can encounter with your plumbing is if there is a slab leak. A slab leak is when a leak forms in the pipes underneath the foundation of your home. Many people ask, “Is a slab leak dangerous?” and the answer is that it can be, depending on how severe the leak is. Not only can it damage your foundation and yard, but it can also mess up the floors in your home, cause your home to smell musty, and even create mold infestation. In order to avoid these things from happening, it’s important to know when you have a slab leak. That might be easier said than done since we aren’t able to see slab leaks, but there are physical signs that develop that will let you know whether you have a slab leak in your home.

  • Pooling Water: Water from the leak will start to collect under the foundation, but it will eventually start to pool in unexpected places.
  • Water Pressure Decrease: If there is a slab leak that means that the water trying to flow through the pipes won’t be able to travel through if there is a leak in the pipe. This can cause a decrease in water pressure.
  • Hot Spots On Floor: Random hot spots on your floor might be due to the fact that the hot water line has a leak. It takes time, but the hot water will heat up the foundation, which will then heat up the floor.
  • Warped Hardwood/Damp Carpet: When water from a busted pipe collects under the foundation, the only place it can really go is towards your flooring. This can cause your carpet to become wet and your hardwood floors to warp.
  • Cracks in Walls/Foundation: Water has the power to cause cracks in your foundation, as well as interior and exterior walls over time.

If you think that you might have a slab leak, the most important thing you can do is call a plumbing contractor. They will be able to perform slab leak detection services to determine if you have a slab leak and then repair your pipes if there is in fact a slab leak.

What Causes a Slab Leak?

We know that a slab leak occurs when the pipes under our home’s foundation start to leak, but it can be hard to determine the cause of the leak. There are a ton of reasons why a slab leak forms, with one reason being the pipes being really old. Old pipes tend to corrode, which can cause leaks over time. Another reason is abrasion, which is when the pipes rub against the surface of the foundation, causing them to leak. The soil shifting can also cause the pipes to shift and this can put pressure on the pipes. In addition to corrosion, abrasion, and pressure, unprofessional construction can also cause slab leaks.

What Is Slab Leak Detection?

Because your slab leak is located in the pipes under your foundation, you can’t exactly see if a leak is present. The best solution to see if a leak actually exists is by investing in slab leak detection. Slab leak detection is a non-invasive way for plumbers to determine if you have a slab leak. There is slab leak detection equipment such as camera inspections, electronic amplification equipment, electromagnetic pipeline locators, and pressure gauges that make it possible for plumbing contractors to find the slab leak and then repair it right away. A lot of people ask, “How does slab leak detection work?” and that all depends on the particular method that is used to detect the leak, but basically the equipment is set in the pipe to figure out if a leak exists. Depending on the equipment, the plumber will be able to see or hear that a leak is present.

What Happens If You Don’t Fix a Slab Leak?

A Picture of a Home's Foundation That Has Been Damaged Due to Water.

Slab Leak Detection and Repair

When you don’t take care of a slab leak right away, the minimum that can happen is that mold starts to grow where what starts to pool and odors will form because of the mold. The worst that will happen when you don’t repair a slab leak is that it will ruin your yard, damage your flooring, and cause a lot of devastation to your foundation. By calling a plumbing company for slab leak detection services, you can prevent these things from happening in your home. Just like if you had a roof leak repair, you would want a roofer to come out and repair it, so contacting a plumber is your best bet in getting rid of a slab leak. For slab leak detection, call Slab Leak Solutions! We can perform a plumbing inspection in Fort Worth, TX that will use slab leak detection technology to find the slab leak. If we find that there is a slab leak, we will repair it right away. Call us at 817-281-5325 to make an appointment.

What is a Plumbing Inspection?

A Plumbing Inspector Goes Through His Checklist

Peace of Mind for Your Home

You’ve probably been told time and time again that an inspection saves you money in the long run. That’s usually true! However, roofers, electricians, and even plumbers can be a little stingy on the details of what an inspection involves. When you choose a quality plumbing company to provide a comprehensive, professional inspection, the results are certainly worth the cost.

Today, we’ll dig into the details of what goes on during inspections, potential costs, and when you should schedule. By the end, you should know how to best use inspections to protect your home and family. Let’s get started!

Inspection for Plumbing

No, we’re not talking about when you call late at night for that monstrous plumbing leak. While plumbers will happily examine your plumbing whenever you have a watery breakdown, that isn’t truly an inspection. Inspections are typically paid services performed by a certified professional that examines a system as a whole, identifies potential issues, and outlines them in an official report.

This holds true with pretty much any professional inspection, whether it be from your electrician, plumber, or roof and siding services. While the majority of inspection services are completely voluntary, there are some situations that will require you to have your plumbing assessed. We’ll talk about those in a little bit.

Inspection Costs

How Much Does it Cost for a Plumbing Inspection?

That depends on what type of plumbing inspection you schedule. Comprehensive system inspections typically fall below $200. Video sewer camera inspections run higher, up to $300. If you bundle the services together, you might be able to get a deal and save a bit of money. Some companies will actually provide a plumbing inspection form online or via email, detailing their service in an itemized list. That’s a very good sign your plumbing company knows what they’re doing.

While $200 to $300 might seem like a lot of money to spend on a usually voluntary checkup, it’s very prudent when you look to buy or sell a home. If you detect a significant plumbing problem, such as a busted sewer line, you could just save yourself from thousands of dollars in repairs.

Duration

How Long Do Inspections Last?

While duration may depend on the type of inspection you have to be done, you can generally expect inspections to take up to an hour. That figure assumes no additional work needs to be done that day. While you might be eager to have the plumber finish up quickly so you can get on with your day, you’ll want to be careful. There’s such a thing as too fast when it comes to inspections, which is why you want a trusted professional performing the assessment.

If your plumber arrives and walks out of the house 15 minutes later, they likely didn’t examine everything they should have. When you schedule an inspection, be sure to ask what all is included in the company’s inspection process. You’re paying good money for this. The report afterward should be thorough.

How Long Does a Sewer Inspection Take?

Again, expect about an hour before the assessment is finished. It takes time to set up sewer plumbing inspection tools, such as the cable and camera. You want them to be very thorough as they look for damage.

Mandatory Situations

When is a Plumbing Inspection Required?

There are several situations that may require you to schedule an inspection. These include:

When Plumbing Inspection is Required

  • Plumbing Inspection for Insurance
  • New Construction
  • Remodeling and Conversion Projects
  • Water and Sewer Line Repair Projects
  • Sewer Line Clog Removal
  • Repiping Work

When you go shopping for home insurance, many companies will require you to submit an inspection report (especially if the house is older). Any home projects that require permits – these include remodels, repiping, and new construction – will likely need an official inspection as well.

Is sewer inspection necessary? If you’ve had leaks out in the yard, your plumber will likely need to perform a camera inspection to assess any damage to your water or sewer lines. This helps them select the most cost-effective repair or replacement options.

How to Prepare for Plumbing Inspection

As much as possible, clean away the areas of your home to be covered in the inspection. You might empty out the area beneath the sink, for example. If you scheduled a sewer line inspection, try to figure out where the sewer clean out opening is to save your plumber a bit of time. While you want your plumber to do a thorough job, you also don’t want them charging for an extra labor hour if it isn’t necessary.

Be sure to grab that plumbing inspection report! You’ll need it for planning future repairs, appliance replacement, and (potentially) your insurance provider.

A Plumber Examines Hot and Cold Connections Beneath a Tub

Schedule a Plumbing Inspection!

Want to schedule a checkup for your home or business? Our certified plumbers at Slab Leak Solutions would be happy to provide you with a plumbing inspection in Fort Worth, TX. All it takes is a simple call to 817-281-5325. We’ll work hard to find a time that fits with your busy schedule!

When You Have A Plumbing Leak

Have you ever had that suspicious feeling that there might be a plumbing leak somewhere in your home? Are you haunted by the sound of ‘plink, plink,’ as water droplets hit the surface of either a counter, tile floor, or other parts of your home? If the answer to any of these questions is yes, then there is a strong possibility of a plumbing leak.

Freezing temperatures can cause the integrity of the pipe to weaken resulting in a plumbing leak.

Plumbing leaks are quite common. As the temperature changes throughout the year, the material of the pipes begin to expand and contract, causing a weakening of the material. Natural corrosion and age can wear down your pipes as well, spelling disaster for your home if not corrected soon enough.

Plumbing Leak Detection

Plumbing leaks are often times difficult to detect. Noises and distractions around the home can cause us to miss the warning signs that there is a problem with the pipes. Knowing the signs of a plumbing leak will better prepare you to notice a leak and have it fixed before disaster strikes.

Water-Meter-Leak-Check-Prevention

Checking your water meter can help you detect a leak before disaster strikes.

Check Your Water Meter – Don’t be alarmed if you are not sure where your water meter is, for most homeowners don’t. A simple way to find out is to call your water provider, and they will be able to help you locate the meter in your home. Once you find it, make sure that there is no water being used inside or outside of your home. Then check to see whether or not the indicator is moving, (most indicators are marked with a triangle shaped dial or a wheel that rotates when water is moving through the pipes.) You can also take a reading every 1 to 2 hours and see if the reading has changed. An increase in the reading is a clear sign of a leak. (Or someone is using a ton of water.)

Higher Water Bills – an astronomical rise in your water bill is a clear sign that you have a leak.

Visible Mold and Mildew – If you notice molding around your shower, on the walls, baseboards, ceilings, and floors then it is a strong indicator of a plumbing leak inside your home. Mold and mildew can cause illness to the people in your home and damage to the structure of your home. This problem is best handled by a plumber, especially if you are having trouble locating the leak. Need a plumber you can trust? Don’t hesitate to call Slab Leak Solutions at 817-281-5325 in Fort Worth, TX.

Smell – A strong musty smell is an indicator that there is mold or mildew on the inside walls, vents, or even underneath the floors. This can be from a leak in the plumbing or from a leak in the ceiling that is causing water to pool up. This can cause water damage to the structures in your home and needs to be taken care of immediately.

Stained or Damaged Ceilings/Floors – If you notice any staining on the ceiling or your floor there is water escaping either from pipes or from your roof. This can also be seen as swelling in the ceiling (which is a major cause for concern as the water is affecting the material of your ceiling/roof,) or even a sloping in the floor as the material weakens. These signs are a cause for alarm, as they mean the structural integrity of those areas is weakening. Make sure to call a plumber, such as Slab Leak Solutions, to help solve the issue before disaster strikes.

Wet Spots – Wet spots around water-based appliances, sinks, or on your floor can point towards there being a plumbing leak.

Foundation Cracks – Small cracks in the foundation of a home is normal, as the home naturally settles over time. If you notice that suddenly a small crack has turned into a large one, or a new one has appeared, then you may have a plumbing leak on your hands.

Outdoor Plumbing Leak Detection

Plumbing leaks are not just restricted to occurring inside your home, but they are also common outside too. Cold weather can cause the outside water lines, such as the main water line, to freeze. When the ice inside the pipe freezes to much, the metal starts to expand as the ice pushes against the material, weakening it and leading to a leak.  You can usually tell if you have a leak outside of your home by noticing soggy or wet spots in your yard or around the outside of your house. This indicates that water is pooling up under the ground. If you suspect an outside leak, call a professional right away to help you fix the problem. (Looking for experts you can trust? Call Slab Leak Solutions at 817-281-5325 for assistance in all of your plumbing needs.)

How Do I Find Out Where a Plumbing Leak is Coming From?

Finding out whether or not you have a leak is one thing, but trying to find the source of the leak is a completely different beast. Sometimes they can be easy to spot, such as water leaking out from underneath your sink, but other times, if the pipe is hidden somewhere within your walls or underneath the floors, it may be more difficult to pinpoint. Here are some tips on how to locate your leak.

Leaks in sinks are a common problem.

Check Kitchens and Bathrooms – It’s pretty self-explanatory why one of the most common places to find leaks would be in your kitchen and bathroom. The places where we use water the most have the highest potential of leaking. Make sure you check in cabinets, paying particular attention to whether or not there are stains on the floor or around the pipes. Also check for corrosion, as this is a common cause of a leaking pipe.

Inspect your Floors, Walls, and Ceilings – Bubbling or peeling paint on the walls and ceiling are indicators of a leak, and generally occur around the location of the leak. If you notice stains around a particular area on the floor, ceiling, or wall, you have pretty much pinpointed the problem location. Other things to look out for is any soggy spots or pooling up of water on the floor, especially near appliances such as a washing machine.

Basements – Inspect any exposed pipes to rule them out for leaks. If you see mold, mildew, or corrosion around pipes than you know you have a leak, and that it is time to call a plumber.  

Underground Plumbing Leaks– To determine whether or not the location of your leak is coming from underground, once again make sure that there are no soggy spots in your yard or around your house. Take particular notice to your driveway or the road near your house. If there are indications that water has run through them, but it hasn’t rained and you haven’t turned on the hose, then you can be sure that there is a plumbing leak underground.

Is A Plumbing Leak Covered By Homeowners Insurance?

Homeowners insurance companies are generally pretty good at helping cover damages caused by sudden plumbing leaks and pipes bursting. Keep in mind though, that damages caused gradually over time by an unnoticed plumbing leak are not covered. It is important to make sure you take care of a leak as soon as you notice it, to help avoid costly water damages to your home and furniture. Make sure you call a plumbing company that will work with you and your insurance company on repairs, like Slab Leak Solutions in Fort Worth, TX. Call us today at 817-281-5325 and allow us to help you stop a plumbing leak before it causes catastrophic damage to you and your home.

Plumbing Leak Repair

If you notice that your water bill is rising, your socks are getting soaked from stepping in a soggy carpet, or you are noticing unsightly stains or mold on the walls or ceiling, it is time to give the experts at Slab Leak Solutions a call at 817-281-5325 in Fort Worth, TX. It is our passion to restore our client’s lives back to normal after a leaky pipe. We will work with you to make sure that your insurance company is on board and that you leaky pipe isn’t going to spell disaster for you or your family.

Commonly Asked Questions Linked to Plumbing Leaks

How Long Does It Take For Mold To Spread?

Under favorable conditions, mold spores begin to form in 3-12 days and become visible to the human eye in 18-21 days. If left unattended, it only takes mold 24-48 hours to spread. Nasal irritation, including congestion, sore throat, cough, and respiratory problems are examples of some health issues caused by mold.

Copper-Water-Pipe

Copper Water Pipes are more durable than PVC pipes.

What is the Best Pipe For Water Lines?

There are many different types of pipes for water lines. Among the most common types for residential use are PVC Pipes and Copper Pipes. Though Copper Pipes boast the best durability, they are expensive. PVC Pipes are more affordable but are prone to cracks and leaks caused by freezing. The type of pipe that is best for your home depends on what it is you are looking for. If you want cost-efficient, it would be the PVC but if you are looking for durability and are willing to spend the money, a copper pipe would be best for you.

Why Choose a Slab Leak Specialist Over a General Plumber

Wrench On Pipe

Let Our Professionals Help You, Today.

When it comes to slab leaks and getting one taken care of right away, there is no better person to call than a professional that only deals with this specific problem. The reason that we recommend that is because general plumbers see a lot of repairs every single day, but they don’t see slab leaks very often. This does not mean that they are not capable of doing them, because they are, it just means that they don’t work on them as often as plumbers that only stick to slab leak detection and repair. If you go to the doctor for a heart problem, you will likely want to go see a specialist that specifically deals with problems with hearts, right? The same concept goes with slab leak repair. When you have this serious of an issue in your home, you will likely want to try to find someone who is well experienced in the repair and detection of a slab leak. A few major keys to look out for when choosing a professional company are to see if they have any reviews. This will determine if they have done work in the area before and see how they did or how their dependability is. Go to websites that reviews cannot be deleted so that you can see everything, not just the good stuff. You will also want to call them and ask any questions that you have and see how you are treated during that phase. It is so important that you remain in good communication with whoever is doing your repair. Slab leaks are nothing to mess around with so you will want someone who knows exactly what they are doing and also are able to do it quickly as well.

How Slab Leaks Work

A slab leak is when there is a leak underneath your home that you cannot see. Sometimes damage occurs under the foundation of your home or pipes begin to get old and a leak will occur. If there is a leak under your slab, it can go undetected for some time. One of the most common signs that people, usually notice first is that their water bill has suddenly begun to get very very high. This is because you have a pipe underground that is constantly leaking water 24 hours a day and being heated by your water heater so it is wasting water and electricity or gas. A slab leak can cause a lot of problems underneath your home, one being that it can cause your slab to move because when the ground gets too wet, the slab can shift, causing the home to shift. This becomes a major issue when there is cracking involved and the cracking ends up moving to the inside of the home. More pipes can become damaged and leaks can potentially spread all over. When you have a slab leak, the chances of getting another one are a lot higher. The best thing that you can do is to call a plumber and have them come out to detect where the leak is located. This can be done is a few different ways like using a camera that goes down into your pipes and will record all of the footage in case something needs to be looked at later on.

What Happens If You Wait To Fix a Leak

When you find out that you have a slab leak, it can be frustrating and overwhelming to figure out how to have it fixed. It can be an expensive repair, but often times, your insurance will help you pay for it if you file a claim. The issue with slab leaks that some people don’t realize the seriousness of is that just like other leaks that you can see in your home, slab leaks are causing the damage down below the surface. So while it may not appear that anything serious is going on, we can assure you, that it is. Every minute that you are waiting to have the leak fixed, water is being wasted and your bill is growing higher and higher. You are also putting you and your family at risk for mold that can develop when water seeps through the floor and sits underneath your flooring or especially your carpet. It can spread all through your home and be very difficult to get rid of. If you end up with a slab leak, it is important to call professionals that deal with these issues every day like Slab Leak Solutions. We are your slab leak detection specialists in Fort Worth, TX. Our team of professionals is here to make sure that you are always taken care of the best way possible. We will provide you with options that suit you the best and that you can feel good about doing. Make sure you call us at 817-281-5325 for help right away.